rsync

rsync


rsync简介

rsync是linux系统下的数据镜像备份工具。使用快速增量备份工具Remote Sync可以远程同步,支持本地复制,或者与其他SSH、rsync主机同步。

rsync 全称 remote synchronize,即 远程同步。
rsync 是 linux系统下的数据镜像备份工具,可用于本地文件复制,也可与其他 SSH、rsync 主机远程同步文件和目录。
使用 rsync 进行数据同步时,第一次进行全量备份,以后则是增量备份,利用 rsync 算法(差分编码),只传输差异部分数据。

rsync特性

Rsync的特性如下:
支持拷贝特殊文件如链接文件,设备等
可以有排除(tar?find?)指定文件或目录同步的功能,相当于打包命令tar的排除功能
可以做到保持原文件或目录的权限,时间,软硬链接,属主,组等属性均不改变-p
可以实现增量同步,既只同步发生变化的数据,因此数据传输效率很高(tar-N)
可以使用rcp,rsh,ssh等方式来配合传输文件(rsync本身不对数据加密)
可以通过socket(进程方式)传输文件和数据(服务端和客户端)
支持匿名的或认证(无需系统用户)的进程模式传输,可实现方便安全的进行数据备份及镜像

rsync的ssh认证协议

rsync命令来同步系统文件之前要先登录remote主机认证,认证过程中用到的协议有2种:

  1. ssh协议
  2. rsync协议

rsync server端不用启动rsync的daemon进程,只要获取remote host的用户名和密码就可以直接rsync同步文件
rsync server端因为不用启动daemon进程,所以也不用配置文件/etc/rsyncd.conf

ssh认证协议跟scp的原理是一样的,如果在同步过程中不想输入密码就用ssh-keygen -t rsa打通通道

//这种方式默认是省略了 -e ssh 的,与下面等价:
rsync -avz /SRC -e ssh root@192.168.222.250:/DEST 
 -a //文件宿主变化,时间戳不变
 -z //压缩数据传输
 
//当遇到要修改端口的时候,我们可以:
rsync -avz /SRC -e "ssh -p2222" root@192.268.222.250:/DEST 
//修改了ssh 协议的端口,默认是22

备份的工具

本地备份:cp
远程备份:scp rsync

rsync命令

Rsync的命令格式常用的有以下三种:
rsync [OPTION]... SRC DEST
rsync [OPTION]... SRC [USER@]HOST:DEST
rsync [OPTION]... [USER@]HOST:SRC DEST

//rsync常用选项:
-a, --archive //归档(打包,包括了权限属性进行传输)
-v, --verbose //啰嗦模式(显示传输过程)
-q, --quiet //静默模式(不显示传输过程)
-r, --recursive //递归(传输目录时加)
-p, --perms //保持原有的权限属性
-z, --compress //在传输时压缩,节省带宽,加快传输速度
--delete //在源服务器(同步主机)上做的删除操作也会在目标服务器(被同步主机)上同步,此选项只是针对目录
此操作下面的主机:
localhost主机:192.168.222.250(源)同步
slave主机: 192.168.222.251(目标)被同步
需要在被同步和同步的主机上面都要安装一个包(rsync)
对应于以上三种命令格式,rsync有三种不同的工作模式:

[root@localhost ~]# dnf -y install rsync
[root@localhost ~]# rpm -qa |grep rsync
rsync-3.1.3-12.el8.x86_64
[root@slave ~]# rpm -qa |grep rsync
[root@slave ~]# 
1)拷贝本地文件。当SRC和DES路径信息都不包含有单个冒号":"分隔符时就启动这种工作模式。如:
在主机本地的时候
[root@localhost ~]# touch xbz
[root@localhost ~]# ls
anaconda-ks.cfg xbz
[root@localhost ~]# rsync -a xbz 123
[root@localhost ~]# ll xbz 123 
-rw-r--r--. 1 root root 0 Sep 22 23:26 123
-rw-r--r--. 1 root root 0 Sep 22 23:26 xbz
//可以看见权限,属主属组还有时间啥子的都是一样的
2)使用一个远程shell程序(如rsh、ssh)来实现将本地机器的内容拷贝到远程机器。当DST路径地址包 \
含单个冒号":"分隔符时启动该模式。如:
将当前主机本地的文件同步的对面目标主机上面
[root@slave ~]# dnf -y install rsync
[root@localhost ~]# rsync -a 123 root@192.168.222.251:/tmp/
The authenticity of host '192.168.222.251 (192.168.222.251)' can't be established.
ECDSA key fingerprint is SHA256:y11UDaNXs3AnvVUnZQfAim2VHAplF09YOvQp2NemHyk.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.222.251' (ECDSA) to the list of known hosts.
root@192.168.222.251's password: 
[root@slave ~]# ls /tmp/
123 vmware-root_945-4013199049
//可以看见文件同步过来了
3)使用一个远程shell程序(如rsh、ssh)来实现将远程机器的内容拷贝到本地机器。当SRC地址路径 \
包含单个冒号":"分隔符时启动该模式。如:
[root@slave ~]# touch tushanbu //可以在目标主机上面创建文件
[root@slave ~]# ls
anaconda-ks.cfg tushanbu
[root@localhost ~]# rsync -a 123 root@192.168.222.251:/tmp/
//将目标主机上面某路径下面的文件同步到源也就是本地主机这里
root@192.168.222.251's password: 
[root@localhost ~]# rsync -avz root@192.168.222.251:/root/tushanbu .
root@192.168.222.251's password: 
receiving incremental file list
tushanbu
sent 43 bytes received 86 bytes 86.00 bytes/sec
total size is 0 speedup is 0.00
[root@localhost ~]# ls
123 anaconda-ks.cfg tushanbu xbz
//可以查看到传输成功

rsync+inotify

rsync与传统的cp、tar备份方式相比,rsync具有安全性高、备份迅速、支持增量备份等优点,通过rsync可以解决对实时性要求不高的数据备份需求,例如定期的备份文件服务器数据到远端服务器,对本地磁盘定期做数据镜像等。
随着应用系统规模的不断扩大,对数据的安全性和可靠性也提出的更好的要求,rsync在高端业务系统中也逐渐暴露出了很多不足,首先,rsync同步数据时,需要扫描所有文件后进行比对,进行差量传输。如果文件数量达到了百万甚至千万量级,扫描所有文件将是非常耗时的。而且正在发生变化的往往是其中很少的一部分,这是非常低效的方式。其次,rsync不能实时的去监测、同步数据,虽然它可以通过linux守护进程的方式进行触发同步,但是两次触发动作一定会有时间差,这样就导致了服务端和客户端数据可能出现不一致,无法在应用故障时完全的恢复数据。基于以上原因,rsync+inotify组合出现了!

Inotify是一种强大的、细粒度的、异步的文件系统事件监控机制,linux内核从2.6.13起,加入了Inotify支持,通过Inotify可以监控文件系统中添加、删除,修改、移动等各种细微事件,利用这个内核接口,第三方软件就可以监控文件系统下文件的各种变化情况,而inotify-tools就是这样的一个第三方软件。
在前面有讲到,rsync可以实现触发式的文件同步,但是通过crontab守护进程方式进行触发,同步的数据和实际数据会有差异,而inotify可以监控文件系统的各种变化,当文件有任何变动时,就触发rsync同步,这样刚好解决了同步数据的实时性问题。

环境说明:

服务器类型IP地址应用操作系统
源服务器(同步)192.168.222.250rsync
inotify-tools
脚本
centos8/redhat8
目标服务器(被同步)192.168.222.251rsynccentos8/redhat8

需求:把源服务器上/etc目录实时同步到目标服务器的/tmp/下

在目标服务器上做以下操作:

关闭防火墙:
[root@slave ~]# systemctl stop firewalld.service 
[root@slave ~]# vim /etc/selinux/config 
SELINUX=disabled
[root@slave ~]# setenforce 0
[root@slave ~]# systemctl disable --now firewalld.service 
Removed /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
安装rsync服务端软件:
[root@slave ~]# dnf -y install rsync
在目标上生成配置文件:
[root@slave ~]# cat >> /etc/rsyncd.conf <<EOF
> log file = /var/log/rsyncd.log # 日志文件位置,启动rsync后自动产生这个文件,无需提前创建
> pidfile = /var/run/rsyncd.pid # pid文件的存放位置
> lock file = /var/run/rsync.lock # 支持max connections参数的锁文件
> secrets file = /etc/rsync.pass # 用户认证配置文件,里面保存用户名称和密码,必须手动创建这个文件
> [etc_from_client] # 自定义同步名称
> path = /tmp/ # rsync服务端数据存放路径,客户端的数据将同步至此目录
> comment = sync etc from client 
> uid = root # 设置rsync运行权限为root
> gid = root # 设置rsync运行权限为root
> port = 873 # 默认端口
> ignore errors # 表示出现错误忽略错误
> use chroot = no # 默认为true,修改为no,增加对目录文件软连接的备份
> read only = no # 设置rsync服务端为读写权限
> list = no # 不显示rsync服务端资源列表
> max connections = 200 # 最大连接数
> timeout = 600 # 设置超时时间
> auth users = admin # 执行数据同步的用户名,可以设置多个,用英文状态下逗号隔开
> hosts allow =192.168.222.250 # 允许进行数据同步的客户端IP地址,可以设置多个,用英文状态下逗号隔开
> hosts deny =192.168.1.1 # 禁止数据同步的客户端IP地址,可以设置多个,用英文状态下逗号隔开
> EOF
创建用户认证文件:
[root@slave ~]# echo 'admin:123456' > /etc/rsync.pass
[root@slave ~]# cat /etc/rsync.pass 
admin:123456
设置文件权限:
[root@slave ~]# chmod 600 /etc/rsync*
[root@slave ~]# ll /etc/rsync*
-rw-------. 1 root root 13 Sep 23 00:39 /etc/rsync.pass
-rw-------. 1 root root 384 Sep 23 00:33 /etc/rsyncd.conf
启动rsync服务并设置开机自启动
[root@slave ~]# yum -y install rsync-daemon
[root@slave ~]# systemctl enable --now rsyncd
Created symlink /etc/systemd/system/multi-user.target.wants/rsyncd.service → /usr/lib/systemd/system/rsyncd.service.
[root@slave ~]# ss -antl
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process 
LISTEN 0 5 0.0.0.0:873 0.0.0.0:* 
LISTEN 0 128 0.0.0.0:22 0.0.0.0:* 
LISTEN 0 5 [::]:873 [::]:* 
LISTEN 0 128 [::]:22 [::]:* 

在源服务器上做以下操作:

关闭防火墙:
[root@localhost ~]# systemctl stop firewalld.service 
[root@localhost ~]# vim /etc/selinux/config 
SELINUX=disabled
[root@localhost ~]# setenforce 0
[root@localhost ~]# systemctl disable --now firewalld.service 
Removed /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
安装rsync服务端软件,只需要安装,不要启动,不需要配置
[root@localhost ~]# dnf -y install rsync
创建认证文件:
root@localhost ~]# echo '123456' > /etc/rsync.pass
[root@localhost ~]# cat /etc/rsync.pass 
123456
设置文件权限,只设置文件所有者具有读取、写入权限:
[root@localhost ~]# chmod 660 /etc/rsync.pass 
[root@localhost ~]# ll /etc/rsync.pass 
-rw-rw----. 1 root root 7 Sep 23 00:45 /etc/rsync.pass
在源服务器上创建测试目录,然后在源服务器运行:
[root@localhost ~]# mkdir -pv /root/etc/test
mkdir: created directory '/root/etc'
mkdir: created directory '/root/etc/test'
[root@localhost ~]# rsync -avH --port 873 --progress --delete /root/etc/ admin@192.168.222.251::etc_from_client --password-file=/etc/rsync.pass
sending incremental file list
deleting vmware-root_945-4013199049/
deleting .font-unix/
deleting .XIM-unix/
deleting .X11-unix/
deleting .Test-unix/
deleting .ICE-unix/
deleting 123
./
test/
sent 77 bytes received 137 bytes 428.00 bytes/sec
total size is 0 speedup is 0.00
查看服务器内核是否支持inotify:
[root@localhost ~]# ll /proc/sys/fs/inotify/
total 0
-rw-r--r--. 1 root root 0 Sep 23 01:07 max_queued_events
-rw-r--r--. 1 root root 0 Sep 23 01:07 max_user_instances
-rw-r--r--. 1 root root 0 Sep 23 01:07 max_user_watches
//如果有这三个max开头的文件则表示服务器内核支持inotify
安装inotify-tools工具包:
[root@localhost ~]# dnf -y install make gcc gcc-c++ 
[root@localhost ~]# dnf -y install epel-release
[root@localhost ~]# dnf -y install inotify-tools
编写脚本:
[root@localhost ~]# mkdir /scripts
[root@localhost ~]# touch /scripts/inotify.sh
[root@localhost ~]# chmod 755 /scripts/inotify.sh
[root@localhost ~]# ll /scripts/inotify.sh
-rwxr-xr-x. 1 root root 0 Sep 23 02:52 /scripts/inotify.sh
[root@localhost ~]# vim /scripts/inotify.sh
[root@localhost ~]# cat /scripts/inotify.sh 
host=192.168.222.251 # 目标服务器的ip(备份服务器)
src=/etc # 在源服务器上所要监控的备份目录(此处可以自定义,但是要保证存在)
des=etc_from_clien # 自定义的模块名,需要与目标服务器上定义的同步名称一致
password=/etc/rsync.pass # 执行数据同步的密码文件
user=admin # 执行数据同步的用户名
inotifywait=/usr/bin/inotifywait
$inotifywait -mrq --timefmt '%Y%m%d %H:%M' --format '%T %w%f%e' -e modify,delete,create,attrib $src \
 | while read files;do
rsync -avzP --delete --timeout=100 --password-file=${password} $src $user@$host::$des
echo "${files} was rsynced" >>/tmp/rsync.log 2>&1
done
启动脚本:
[root@localhost ~]# nohup bash /scripts/inotify.sh &
[1] 61849
[root@localhost ~]# nohup: ignoring input and appending output to 'nohup.out'
再打开一个终端查看
[root@localhost ~]# ps -ef|grep inotify
root 61849 4406 0 02:56 pts/2 00:00:00 bash /scripts/inotify.sh
root 61850 61849 0 02:56 pts/2 00:00:00 /usr/bin/inotifywait -mrq --timefmt %Y%m%d %H:%M --format %T %w%f%e -e modify,delete,create,attrib /etc
root 61851 61849 0 02:56 pts/2 00:00:00 bash /scripts/inotify.sh
root 62662 61992 0 02:57 pts/0 00:00:00 grep --color=auto inotify 

测试脚本:

在源服务器上生成一个新文件:
[root@localhost ~]# touch /etc/xbz
查看inotify生成的日志:
[root@localhost ~]# tail /tmp/rsync.log 
20220923 03:00 /etc/xbzCREATE was rsynced
20220923 03:00 /etc/xbzATTRIB was rsynced
在目标服务器中也可以看见创建的xbz文件
[root@slave ~]# ls
etc test
[root@slave ~]# ls etc/xbz
etc/xbz

设置脚本开机自动启动:

[root@localhost ~]# chmod +x /etc/rc.d/rc.local
[root@localhost ~]# vim /etc/rc.d/rc.local
[root@localhost ~]# cat /etc/rc.d/rc.local 
#!/bin/bash
# THIS FILE IS ADDED FOR COMPATIBILITY PURPOSES
#
# It is highly advisable to create own systemd services or udev rules
# to run scripts during boot instead of using this file.
#
# In contrast to previous versions due to parallel execution during boot
# this script will NOT be run after all other services.
#
# Please note that you must run 'chmod +x /etc/rc.d/rc.local' to ensure
# that this script will be executed during boot.
touch /var/lock/subsys/local
hup /bin/bash /scripts/inotify.sh & #添加此行
作者:涂山布原文地址:https://www.cnblogs.com/tushanbu/p/16721424.html

%s 个评论

要回复文章请先登录注册